Winter brings skating, skiing and sledding to many parts of the
country, but it also brings hazards. Driveways, sidewalks and steps can
become potentially dangerous when covered with snow or ice. Floor
heat systems provide a safe, reliable and economical alternative to snow
removal and ice melting. Floor heat systems circulate warm water through
durable tubing buried in concrete, turf, asphalt, or a sandbed. The
water heats the slab until it is warm enough to melt snow and ice. The
system can be controlled by a simple on/off manual switch, or it can be
fully automatic.
Floor heat systems give the peace of mind and convenience of not
having to shovel, sand or salt in winter.
Floor heat systems are often used in areas where safe, clean and easy
access is critical: hospital emergency entrances, wheel chair access
ramps, helipads, building entrances, parking ramps, parking lots,
loading docks, public stairs and football fields. Floor heat systems are
also used for convenience and safety in residential driveways and
walkways.
Floor heat systems provide safety, reduce maintenance - no sand and
salt means that pavement lasts longer.
Reverse
Osmosis Sizes Available From 1500 to 4000 Gallons per Day. • We build to meet your requirements
Reverse Osmosis includes:
• 220 gallon storage tank
• Stainless steel frame (33" x 43") for tank and pump Stand may be slightly larger with automatic delivery pump • Goulds stainless steel multi-stage pump
• Filmtec thin-film composite membrane with vessel
• Filter tank with regeneration unit (includes one cubic foot
activated charcoal)
• Flow meters
• Micron filter
• Panel display
Repressurization includes:
• Goulds stainless steel multi-stage pump
• Dema high-pressure 453PS solenoid
• Freight added, will ship LTL only, fob Windtrax, Inc.
Replace Old Unit and Reduce Maintenance Features:
• Stainless steel frame #SSPF-BD/DD 25"d X 22" w x 56"
h
• Stainless steel control box prewired for easy hookup
• Prewired 24-volt magnetic starter with overload protection
• 230/24-volt 100va heavy duty transformer
• OCi silicon filled 0 - 2000 psi gauge
• KIP 24-volt s.s. solenoid valves for soap and wax
• Adjustable flow meters
• DEMA 24-volt normally open solenoid valve for weep system
• Stainless steel belt guard
• Pumping unit will operate on pressure fed hot and cold water or hot
water can be in open storage tank
• Belt driven units have a dual V-belt
• Timers not included
• Will ship LTL only, freight added, fob Windtrax, Inc.
Foam brush, Tire/Engine cleaner, Presoak • Stainless steel wall mount frame 13" wide x 37" high
• 3-Gallon stainless steel chemical mixing tank
• DEMA Aquamaster proportioning valve
• FLOJET G575215A air pump
• KIP 24-volt stainless steel metering solenoid valves
(2 per bay - used for chemical and air)
• ARO 1/4" mini air regulator/water separator combo
• OCi 0-160 psi backmount gauge
• Air compressor not included
• Freight added, fob Windtrax, Inc.
Additional Items May Be Needed Depending On Your Installation.
Foam brushes, Foam brush handles, Foam brush hoses, Foam generator,
Poly tubing, Poly tube fittings, Check valve, Brass fittings, Chemicals,
180° Boom
Foam brush, Tire/Engine cleaner, Presoak • Stainless steel frame
• Stainless steel 8-gallon mixing tank with stainless steel lid
• ARO 1/2" twin diaphragm air pump
• Hydrominder Proportioner
• KIP Stainless steel metering solenoid valves for air and soap
mounted to tank frame
• ARO 1/4" mini air regulator/water separator combo
• HYPRO 80-mesh strainer
Optional:
• Additional 8-gallon tank optional
• Air compressor not included
• Freight added, will ship LTL only, fob Windtrax, Inc.
Additional Items May Be Needed Depending On Your Installation.
Foam brushes, Foam brush handles, Foam brush hoses, Foam generator,
Poly tubing, Poly tube fittings, Check valve, Brass fittings, Chemicals,
180° Boom
