Home | News | About Us | Contact | Links | Product Search | My Account

Foam Guns

• Foam Gun

• Foam Nozzles

• Foam Generator

Tri foam is the hot marketing tool for the car wash industry. Colorful foam is eye catching and an effective means of cleaning a customers vehicle as well as selling additional services to the customer.

A good choice for a tri foam system is Windtrax Triple Color Foam Brush system or Tri Foam Conditioner system. Once a system makes the foam, the customer must be able to get the foam onto the vehicle. It is recommended that the triple color soap be applied with a foam brush and that the tri color conditioner or polish be applied with a foam gun.

This is not an obstacle since a foam system may be used for either application but a separate unit is required for each application. 

Related searches: | Triple Foam |

Hamel model 414, 1/4 inch and model 438, 3/8 inch foam guns

• Straight through gun handle without trigger
• Molded urethane body with nozzle protector
• Weight 12.0 oz.
• Rear inlet - 1/4" or 3/8" fpt
• Discharge - 1/8" fpt
• Available in black, red and blue

Note: Because of the absence of a trigger, it is not recommended that this gun be used for high pressure.

back to top

Urethane bell shaped nozzle protector

• Simple press on fit design
• A large, wide spray tip is recommended - e.g. 1/8MEG-5020, 1/8MEG-5030, etc.
• Available in Red, Blue or Black.
• May also be used as tip protector in other applications.

back to top

Air and Chemical Mixer 
• PVC 1” diameter by 11” long
• 1/4” fpt air and chemical inlet
• 1/2” fpt foam discharge
• Should be mounted close to foam discharge (foam brush, foam gun, etc.)

Note: Although a foam system can be used without a foam generator, it is recommended especially when an air pump is in use. This will greatly reduce the pulsation or surge effect.

back to top

 <PREVIOUS | Foam Guns | NEXT>