FLECK WATER SOFT 288K GRAIN TWIN TANK

Modell 2900 Downflow
2" Water Conditioning Control

• Incorporates 2 time tested hydraulically balanced pistons to independently pilot service flow and regeneration
• Brings great performance and versatility to commercial/industrial applications.
• Suitable for  use with single or multiple tank systems.
• Backwashes tank up to 30" diameter
• Continuous flow rate is 106 gpm @ 15 psi drop
• Available with 7 or 12-day timer or meter to control regeneration
• Solid lead free brass valve body
• Softeners shipped fob factory, LTL freight added

How the Twin-Tank Softener works.
Water Softening Process
Hard water enters the tank in service. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it's soft.

Regeneration Process
When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh soft water rinses all the brine out, leaving the tank ready for service.
FYI: Typical water ranges from 1 gpg (grains per gallon) to wel in excess of 100 gpg of hardness. The Environmental Protection Agency recommends using water not exceeding 7 gpg.

This Model:
Max. Grains:   288,000
Resin Qty.:   9 cu ft
Resin Tank Size:  24x72 (2)
Pipe Size:  2"
Salt Capacity:  1200#
Salt Tank Size (in):   30x48
Cont. Flow:   71
Peak Flow:   94
Water PSI:   25-125